Интерфейс Ethernet 1000Base-T - разводка кабеля, техническая информация, описание

Навигатор: QRZ.RU > Радиолюбительские справочники > Справочник компьютерного инженера

Ethernet 1000Base-T

1000 Base-T uses all pairs for bidirectional traffic in the RJ45 connector. Cables used should be of Category 5e(nhanced), even though Category 5 cables usually works too.

 (at the network interface cards/hubs)
 (at the cables)

RJ45 FEMALE CONNECTOR at the network interface cards/hubs.
RJ45 MALE CONNECTOR at the cables.

Pin	Name	Description
1	BI_DA+	Bi-directional pair A +
2	BI_DA-	Bi-directional pair A -
3	BI_DB+	Bi-directional pair B +
4	BI_DC+	Bi-directional pair C +
5	BI_DC-	Bi-directional pair C -
6	BI_DB-	Bi-directional pair B -
7	BI_DD+	Bi-directional pair D +
8	BI_DD-	Bi-directional pair D -

Contributor:

Niklas Edmundsson,

Source:

IEEE Std 802.3, 2000 Edition

Информация предоставлена справочником The Hardware Book Team 1996-2004.

Навигатор: QRZ.RU > Радиолюбительские справочники > Справочник компьютерного инженера