Интерфейс Apple SCSI HDI-30 - разводка кабеля, техническая информация, описание
| Навигатор: QRZ.RU > Радиолюбительские справочники > Справочник компьютерного инженера |
Apple SCSI HDI-30
30 PIN UNKNOWN CONNECTOR
| Pin | Name | Dir | Description |
|---|---|---|---|
| 1 | n/c | Reserved for SCSI disk mode. | |
| 2 | /DB0 |  |
Bit 0 of SCSI data bus |
| 3 | GND |  |
Ground |
| 4 | /DB1 | |
Bit 1 of SCSI data bus |
| 5 | TPWR | |
Termination power |
| 6 | /DB2 | |
Bit 2 of SCSI data bus |
| 7 | /DB3 | |
Bit 3 of SCSI data bus |
| 8 | GND | |
Ground |
| 9 | /ACKS |  |
Handshake signal. When low acknowledges a request for data transfer |
| 10 | GND | |
Ground |
| 11 | /DB4 | |
Bit 4 of SCSI data bus |
| 12 | GND | |
Ground |
| 13 | GND | |
Ground |
| 14 | /DB5 | |
Bit 5 of SCSI data bus |
| 15 | GND | |
Ground |
| 16 | /DB6 | |
Bit 6 of SCSI data bus |
| 17 | GND | |
Ground |
| 18 | /DB7 | |
Bit 7 of SCSI data bus |
| 19 | /DBP | |
SCSI data bus parity bit |
| 20 | GND | |
Ground |
| 21 | /REQ |  |
Request for a data transfer |
| 22 | GND | |
Ground |
| 23 | /BSY | |
When active (low) indicates that the SCSI data bus is busy |
| 24 | GND | |
Ground |
| 25 | /ATN | |
When active (low) indicates an attention condition |
| 26 | /C/D | |
When active (low) indicates that data is on the SCSI bus. When high, indicates that control signals are on the bus |
| 27 | /RST | |
SCSI bus reset |
| 28 | /MSG | |
Indicates the message phase |
| 29 | /SEL | |
SCSI select |
| 30 | /I/O | |
Controls the direction of data output. When high, data is input |
Note: Direction is Device relative Bus (other Devices).
| Contributor: | Joakim Цgren |
| Source: | Apple Tech Info Library 12929: Duo Dock/Duo Dock II, External Pinouts at Apple TIL homepage |
Информация предоставлена справочником The Hardware Book Team 1996-2004.
| Навигатор: QRZ.RU > Радиолюбительские справочники > Справочник компьютерного инженера |